Certification

Grade 2 ANSI/BHMA certified.

Durability

Lifetime Guarantee for Mechanical and Finish.

Weather

Weather Resistance with UL/BHMA approved for high humidity use.
Silicone Conformal Coating is used to provide an all round protective coating for electronic board against moisture, corrosion, and thermal shock.

Keypad

Unlock Way

Access Code:
1. Software-generated 10-digit Access Code.
2. User-created 3-6 digit Personalized Code.
3. No time-related Private Master Code.
Backup Key:
Two backup keys for emergency override, 5-pin, C-section.

For Guest:
1. Short term stay - Control stay length from one hour to 32 days, check-in/check-out time at any hour of the day.
2. Long term stay - Control stay length from 32 days to 732 days (2 years).

For Personnel:
1. Short term staff - Control employment term from one day to 32 days, daily start/end work time at any hour of the day.
2. Long term staff - Control employment term from one month to 24 months (2 years), daily start/end work time at any hour of the day.
3. One time use code - Control the external service people to access the property only one time on appointed day.

For Facility:
1. Short term use - Control use term from one day to 32 days, daily open/close time at any hour of the day.
2. Long term use - Control use term from one month to 24 months (2 years), daily open/close time at any hour of the day.
3. One time use code - Control the external service people to access the facility only one time on appointed day.

For Group:
It's used for staff only. One group Access Code to access all eRL Lock Devices which are defined in the same Group.
1. Short term staff - Control employment term from one day to 32 days, daily start/end work time at any hour of the day.
2. Long term staff - Control employment term from one month to 24 months (2 years), daily start/end work time at any hour of the day.
3. One time use code - Control the external service people to access the property only one time on appointed day.

User Code Capacity

If using software-generated 10-digit access codes:
Unlimited software-generated 10-digit access codes can be used to access at the same time.
If using user-created 3-6 digit Personalized Codes:
Up to 40 user-created 3-6 digits Personalized Codes can be remembered by the lock and used to access at the same time.

Unwanted Code

Up to 20 valid Access Codes can be disabled at the same time by Private Master Code or another valid Access Code.

Lever Handle

Full size field reversible lever handle to fit left and right swinging doors.

Thumbturn Function

When enabled:
Turn the Thumbturn can enable/disable exterior lever to switch to automatically locking to unlocked as needed.
When disabled:
Turn the Thumbturn can’t enable/disable exterior lever.

Vacation Mode

When set in this mode:
All Access Codes and Personalized Codes are disabled.
Leave this mode:
Unlock by Private Master Code to leave this mode.

Keypad Beeper

Keypad Beeper can be enabled or disabled by keypad command.

Anti Code Guessing

The keypad is disabled for 30 seconds if incorrect code is entered 3 times in row.

Turn Knob

Vandal resistant free-spinning lever with patented commercial grade clutching motor drive, tested to one million cycles.

Body

All-metal chassis and escutcheons.

Power

9V Battery Operated – 3 year average life with low battery warning.

Operation Temperature

-22 º F (-30ºC)  -  140 ºF (60 ºC)

Internal Clock

1. < ±5 minutes average deviation per year.
2. Backup power can keep clock running for 24 hours if the lock batteries are failure.
3. Automatic Daylight Savings Time and Leap Year correction.

Door Thickness

Fits doors 1 3/8" to 1 3/4" (34mm to 45mm) thick.

Door Hole

Covers existing 2 1/8" door hole.
Adjustable latchbolt to fit 2 3/8" or 2 3/4" backset.

Programming Method

Three simple keypad commands:
1. Change the Master Code when first time to setup the lock.
2. Adjust the date/time in lock when needed.
3. Disable a valid Access Code when needed.

Installation

Non-professional, DIY.